TECHNICAL INFORMATION AND GEOMETRY We use the same perfectly tuned street/park/dirt geometry on ALL our frames, which are all designed to be used with dual 26", dual 24", or 24/26" wheels. The only difference with the Pinscher is that we managed to make its chainstays even shorter... We hope you enjoy it! 2 sizes available : SMALL : 21.5" top tube LARGE : 22.5" top tube - Ajustable chainstays from 14.75" to 15.5" (375mm/395mm) (365mm/14.37" on the 2008) - 110mm / 69° head tube - 12.5" / 71° seat tube - 31.6mm seatpost / 34.9mm seatclamp - +15mm BB height		The PINSCHER is a classy, Canadian made, affordable frame. It uses the same perfect DO*BER*MANN geometry as all our models, and it's fully hand made, inhouse, just like the others. We made it just a little bit easier to build and less expensive to produce, but made sure it would be just as funn to ride!! • True Temper Plain Gauge tubes and aerospace 4130. - UTS (1) : 105-120 ksi. / YS (2) : 100 ksi - That's MUCH stronger than most 4130 tubesets used in Taiwan - The frame is only 5.5lbs! • Euro BB • OPTIONAL Disc and V-Brake mounts (24" and 26" wheel compatible) - 25$CAD EXTRA. • 1.1/8" head tube. • Fat horizontal drop outs, single speed or derailleur compatible. • Standard Colors : Khaki, Burgundy • Custom Colors available, here's some examples : RawClear / TransGreen / TransBlue / SmokeClear / White / ChocoMilk / Baby Blue / etc. ADDITIONNAL OPTIONS : • Pinscher machined head tube : 40$CAD • MBF machined seat tube : 40$CAD • Ribbed seat tube for more pleasure : 50$CAD • MBF machined BB : 40$CAD • MBF Top tube gusset : 75$CAD • Double wall chainstays : 50$CAD • 14mm dropouts (135mm spacing) : 50$CAD • Custom serial number : 20$CAD We're frame builders, and this truely is all we're really good at... We should have some extremely nice - pro quality - pics of the frames taken as soon as we have a few hours off at the shop, but until then, have a look inside the PRODUCT PICS Media section. (1) UTS : THE ULTIMATE TENSILE STRENGTH This is the maximum resistance to fracture of the material. Simply put, its the point where the tube (frame) will break. Most 4130 tubesets used by Taiwanese frame manufacturers have a UTS of 75ksi. (2) YS : THE YIELD STRENGTH This is the maximum resistance to deformation or the material that will remain even after stress is removed. Symply put once again, its the point were your frame will be bent. Most 4130 tubesets used by Taiwanese frame manufacturers have a YS of 70ksi.